Cheval Flushmount: Ceiling Light Installation Tips
By Blueprint Lighting | Published: 2026-10-19
Category: How-to Guides
Learn how to install a flush mount ceiling light like the Cheval Flushmount with our step-by-step guide, including wiring tips and common mistakes to avoid.
Quick Answer
Installing a flush mount ceiling light like the Cheval Flushmount is a straightforward DIY project if you follow the right steps: turn off power, mount the bracket, wire the fixture, and secure it. Pay close attention to wiring connections and bracket alignment to avoid common issues.
Why Bracket Alignment Matters
The mounting bracket is the backbone of your flush mount installation. If it's not level or securely attached, the fixture will hang crooked or feel loose. For a compact fixture like the Cheval Flushmount, which has a stepped silhouette, even a slight tilt is noticeable.
Always use the provided mounting screws and anchors appropriate for your ceiling type. If you're mounting onto a ceiling box, ensure it's rated to support the fixture's weight. For older homes, you may need to reinforce the box with a brace.
Wiring Safety and Connections
Wiring is the most critical part of any ceiling light installation. Before touching any wires, confirm the power is off at the breaker. Use a voltage tester to double-check that no current is flowing to the fixture.
Match wire colors: black to black (hot), white to white (neutral), and bare copper to green (ground). Secure connections with wire nuts and wrap with electrical tape for extra safety. If your home's wiring lacks a ground wire, consult an electrician—never skip the ground connection.
Step-by-Step Installation Guide
- Turn Off Power and Prep: Turn off the circuit breaker that controls the ceiling light. Remove the old fixture and disconnect the wires. Use a voltage tester to confirm no power is present. Always double-check with a voltage tester—never assume the power is off.
- Install the Mounting Bracket: Secure the mounting bracket to the ceiling box using the provided screws. Ensure it is level and firmly attached. If the box is not rated for the fixture's weight, install a ceiling box brace. A level bracket prevents a crooked-looking fixture.
- Connect the Wires: Connect the fixture's wires to the ceiling wires: black to black, white to white, and ground to ground. Use wire nuts and wrap with electrical tape. Tuck the wires neatly into the box. Secure connections prevent flickering and short circuits.
- Attach the Fixture: Lift the Cheval Flushmount and align its mounting holes with the bracket screws. Tighten the screws evenly, alternating sides, until the fixture sits flush against the ceiling. Tighten evenly to avoid cracking the glass or misaligning the fixture.
- Install the Diffuser and Bulbs: Screw in the recommended bulbs (check the fixture's label for wattage and type). Attach the hand-blown frosted glass diffuser securely. Turn the power back on and test the light. Use the correct bulb type to prevent overheating and potential damage.
Product Spotlight
- Cheval Flushmount: The Cheval Flushmount is crafted from solid brass with a hand-blown frosted glass diffuser and a stepped silhouette inspired by Art Deco geometry. Its compact design and elegant finish make it a stylish choice for hallways or entryways, and the frosted glass diffuser provides soft, even light that reduces glare.
Cheval Flushmount
